61
For Sale/Wanted to Buy / Re: 2008 Summit XP "X" 154" E-Start - $6800
« on: September 09, 2012, 09:46:05 AM »
Sold.
Thanks,
-John
Thanks,
-John
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 61
For Sale/Wanted to Buy / Re: 2008 Summit XP "X" 154" E-Start - $6800« on: September 09, 2012, 09:46:05 AM »
Sold.
Thanks, -John 62
Bike Help / Re: Anybody willing/able to weld something for me?« on: June 13, 2012, 07:17:01 PM »
Oh, and welcome tipster!
-John 63
Bike Help / Re: Anybody willing/able to weld something for me?« on: June 13, 2012, 07:15:18 PM »Hey all, Hello tipster, Thank you very much for being willing to help me out but I believe I have the situation taken care of. Again, much appreciated! -John 64
Bike Help / Re: Anybody willing/able to weld something for me?« on: June 10, 2012, 09:18:14 AM »You going to be running an Autotune Power Commander? Yes, PC-5 and Autotune. Thanks, -John 65
Bike Help / Re: Anybody willing/able to weld something for me?« on: June 09, 2012, 09:25:20 PM »
Well I went down to Ducati of Mpls today and the person I made the appointment with on Wed. was mistaken and thought that I wanted a small 6mm bung fitted... I need an 18mm bung installed and they were not able to do that for me in house. I thought it seemed too easy!
I think I am just going to get the ECU flashed and have the closed loop O2 sensor curcit removed. With that done I will be able to use the stock O2 sensor hole for my Bosh wideband sensor. Thanks, -John Thanks, -John 66
Bike Help / Re: Anybody willing/able to weld something for me?« on: June 04, 2012, 01:50:40 PM »Ducati Mpls will do it on the bike..They don't weld it though, they drill and use a compression type fitting that works well Thanks for the info Duc Man, I appreciate it! -John 67
Bike Help / Anybody willing/able to weld something for me?« on: June 04, 2012, 12:45:04 PM »
Hey all,
I have a exhaust mid-pipe that I need drilled and a O2 bung welded in. The area I am looking to have this done on the pipe is fully accessible whith the pipe still installed on the bike but am not sure if it is harmful to weld while it is still installed on the bike(would certainly make the project much easier as I could ride the bike to wherever I needed to and not have to dis-assemble). The other catch is I believe the pipe is titanium....(correction, I believe the pipe I'm working with is actually stainless steel) Is there anyone who would be willing/able to do this for me? Not looking for a freebie but simply would like a quality end result. Let me know, ok? Thanks much, -John 69
For Sale/Wanted to Buy / Re: FS: 2008 Ducati 1098S« on: May 01, 2012, 07:40:44 PM »GLWS John. What is next for your stable? Hey Tim! Right now/at the moment I am thinking about a 2009+ R1 because I have not owned a Yamaha bike yet. Well see, if it doesn't sell I certainly don't mind riding it! Thanks, -John 70
For Sale/Wanted to Buy / Re: FS: 2008 Ducati 1098S« on: May 01, 2012, 06:50:08 PM »
I also forgot to mention that I have a free & clear title in hand for ease of transaction.
Thanks, -John 71
For Sale/Wanted to Buy / Re: 2008 Summit XP "X" 154" E-Start - $6800« on: April 30, 2012, 10:43:19 AM »
$6100.00. Lets find this sled a new home!
-John 72
For Sale/Wanted to Buy / Re: FS: 2008 Ducati 1098S« on: April 30, 2012, 08:57:48 AM »
I'll also throw in all the basic specialized tools for adjusting chain tension(axle nut socket/spanner wrench) and other misc. specialized tools. Also includes the Ducati Data Analyzer system. The DDA package enables the retrieval of data and analysis of data collected from your previous track session or road trip. The DDA package includes software for your personal computer on CD, a data retrieval USB key and instructions. I also have the dyno sheets before and after full Termi exhaust install.
Thanks, -John 73
For Sale/Wanted to Buy / FS: 2008 Ducati 1098S« on: April 26, 2012, 04:16:45 PM »
2008 Ducati 1098S model. The bike is in perfect condition and has been always meticulously cleaned/detailed after every ride! Never dropped, dumped, crashed, ect..!! Never ridden in the rain. It's got over $8000.00 in accessories. This include a full Termignoni exhaust/ECU, Ducati Performance slipper clutch, Ducati Performance carbon fiber everywhere, more! Bike just had the full service/timing belts done this winter and oil and filters changed/fluids replaced as well. 10,xxx miles. The bike needs nothing and is ready to have a full season of fun on! Serious inquiries only! No test rides. $15,000.00 Located in Greenfield/Loretto(55357). PM or E-mail please.
http://www.nadaguides.com/Motorcycles/2008/Ducati/1098-S-1099cc/Standard-Equipment Thanks, -John 74
For Sale/Wanted to Buy / Re: 2008 Summit XP "X" 154" E-Start - $6800« on: March 14, 2012, 07:53:36 PM »So a couch, Lawn chair, window with blind, blanket, work bench, vise, garage door, stool.... wow that is a good deal. "Everything shown on it in the pics". That eliminates the couch, Lawn chair, window with blind, blanket, work bench, vise, garage door, stool. Thanks, -John 75
For Sale/Wanted to Buy / Re: 2008 Summit XP "X" 154" E-Start - $6800« on: March 14, 2012, 07:09:01 PM »
More pics. The sled comes with all the goodies shown on it in the pics!
Thanks, -John |